Toa NF-2S Instruction Manual page 4

Window intercom system expansion set
Hide thumbs Also See for NF-2S:
Table of Contents

Advertisement

Applicable to NF-2S only
• Use the unit only with the voltage specified on the unit. Using a voltage higher than that which
is specified may result in fire or electric shock.
• Do not cut, kink, otherwise damage nor modify the power supply cord. In addition, avoid using
the power cord in close proximity to heaters, and never place heavy objects -- including the unit
itself -- on the power cord, as doing so may result in fire or electric shock.
• Do not touch a power supply plug during thunder and lightning, as this may result in electric
shock.
CAUTION
• Avoid installing the unit in humid or dusty locations, in locations exposed to the direct sunlight,
near the heaters, or in locations generating sooty smoke or steam as doing otherwise may
result in fire or electric shock.
• To avoid electric shocks, be sure to switch off the unit's power when connecting speakers.
• Do not operate the unit for an extended period of time with the sound distorting. Doing so
may cause the connected speakers to heat, resulting in a fire.
• Avoid placing any magnetic media in close proximity to the Sub-Unit magnets, as this could
have a harmful effect on the recorded contents of magnetic cards or other magnetic media,
possibly resulting in damaged or destroyed data.
Applicable to NF-2S only
• Never plug in nor remove the power supply plug with wet hands, as doing so may cause
electric shock.
• When unplugging the power supply cord, be sure to grasp the power supply plug; never pull
on the cord itself. Operating the unit with a damaged power supply cord may cause a fire or
electric shock.
• When moving the unit, be sure to remove its power supply cord from the wall outlet. Moving
the unit with the power cord connected to the outlet may cause damage to the power cord,
resulting in fire or electric shock. When removing the power cord, be sure to hold its plug to
pull.
• Make sure that the volume control is set to minimum position before power is switched on.
Loud noise produced at high volume when power is switched on can impair hearing.
• Be sure to use only the designated AC adapter and power cord. Using any other than the
designated components could result in damage or fire.
• If dust accumulates on the power supply plug or in the wall AC outlet, a fire may result. Clean
it periodically. In addition, insert the plug in the wall outlet securely.
Indicates a potentially hazardous situation which, if mishandled, could
result in moderate or minor personal injury, and/or property damage.
4

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the NF-2S and is the answer not in the manual?

This manual is also suitable for:

Nf-cs1

Table of Contents