Nf-Cs1 - Toa NF-2S Instruction Manual

6.2. NF-CS1

6.2.1. Distributor
[Left side]
1
1. I/O connector
Use the dedicated cable to connect the NF-
2S Base Unit's Sub-Unit jack, the Sub-Unit's
Cable connector or another Distributor's I/O
connector.
6.2.2. Sub-Unit
These are identical to the Sub-Units that come with the NF-2S. (See
Tip
Although their labels may appear slightly different from those of the NF-2S's Sub-Units, operation and
performance are exactly the same.
[Front] [Right side]
1
"Sub-Unit" on p. 10.)
1
11