Table of Contents
Advertisement
9.5.6 Terminate on
9.5.7 Line
9-10
Click Mode Operating Instructions
To define the automatic stop condition, it is possible to select between two
options: 40 Clicks/Time and Time/Manually.
In the first case the stop of the step happens either after 40 clicks or after
the defined time has elapsed; in the second case the step is not terminated
when reaching 40 clicks (allowing thus testing EUTs which are commanded
by a program) but only when the defined time has elapsed. It is always
possible to stop the step manually.
it is also possible to stop the test manually.
Press Change to flip from one to the other option.
When using a PMM LISN, it's possible to select the Line on which to
perform the test through the Setup Menu, just selecting "LINE" and
accessing the related sub-menu, as per the following:
In case a 3rd party LISN would be used, just leave "NONE" in the menu.
Advertisement
Table of Contents
