Table of Contents
Advertisement
8.4 Software Installation
The Update Firmware Program is installed together with the PMM 9010
Software Utility, provided on a CD-Rom with PMM 9010 Receiver.
Once the PMM 9010 Software Utility has been installed in the PC, another
item is created in the Programs list at Start Menu, which is "9010
Accessories", from where the "9010 Update" program can be easily run
Click on "9010 UPDATE" (9010UP.EXE) once for running the update
program, so getting the following window:
Please be sure the new FW file named "9010FW.bin" is stored in the same
directory of the 9010UP.exe file, otherwise just copy it there before
performing the upgrade.
Be sure batteries of PMM 9010 and connected Laptop (PC) are fully
charged before performing the FW Upgrade, otherwise the upgrade
progress could not terminate properly.
Alternatively, be sure to have both PMM 9010 and Laptop (PC)
powered through their respective AC/DC power adapters.
Anyway, even in case of failure, the internal BIOS will never be
corrupted and you'll just need to repeat the procedure once more
(this is a unique feature!).
8-2
Updating Firmware
Advertisement
Table of Contents
