Canon PIXMA MP830 User Manual page 133

3
Select the scan operation.
(1) Press [SCAN].
The scan process selection screen is displayed.
(2) Use [ ] or [ ] to select the scan operation, then press [OK].
Scan method select screen is displayed.
Save to PC:
Save as PDF file:
Attach to E-mail:
Open with application:
4
Select the scan method.
(1) Use [ ] or [ ] to select the scan method, then press [OK].
Scan standby screen is displayed.
Two-sided scan from
ADF:
One-sided scan from
ADF:
Scan from platen:
5
Press [Color] or [Black].
The document is scanned. The settings configured from MP Navigator apply when scanning.
Important
If with some types of original the position and size of the image is not scanned in correctly,
please refer to "Selecting the Behavior of the Operation Panel with MP Navigator" in the Scan
Guide (On-screen Manual) and change the MP Navigator [Document Type] and [Document
Size] to match those of the original being scanned.
Chapter 7
The document is scanned and saved.
The document is scanned and stored as a PDF file.
The document is scanned, and the image is attached to an e-mail
using the e-mail application software.
The document is scanned and displayed on the registered
application software.
Scans two-sided documents from the ADF.
Scans one-sided documents from the ADF.
Scans from the Platen Glass.
Scanning Images 131