Canon PIXMA MP830 User Manual page 17

(26) Duplexing Transport Unit
Open when clearing jammed paper after pulling out the Cassette.
(27) Power Connector
This is the connector used to connect the provided power cord.
(28) Rear Cover
Open when clearing jammed paper.
(29) External Device Jack
Connects the external device.
(30) Telephone Line Jack
Connects with the telephone line.
(31) USB Connector (for computer)
This is the connector used to connect the machine to a computer using a USB cable.
Important
While the machine is printing from or scanning images to the computer, or the computer is
in the sleep mode or standby mode, do not disconnect and connect the USB cable.
Note
For information on how to install the Print Head and ink tanks, refer to the Easy Setup
Instructions.
Ink Tank Lamps
You can check the status of each ink tank according to the way its lamp flashes.
On: The machine is ready to print.
Slow flashing (about three seconds): Ink is low. Prepare a new ink tank. For details,
see "Getting the Ink Level Information" on page
Fast flashing (about one second): Ink tank is empty, or the machine is not ready due to
an error.
Off: Make sure all the ink tanks are installed properly. If an Ink Tank Lamp remains unlit
even after reinstalling ink tanks, an error has occurred and the machine is not ready to
print.
Chapter 1
142.
Before Printing 15