Other Settings; Read/Write Attribute - Canon PIXMA MP830 User Manual

Incoming ring
Sets whether to ring with an incoming call when the receive mode is set to <FAX only> or <FAX/
TEL auto switch>. A telephone needs to be connected for the machine to ring.
Ring count
Manual/auto switch
Sets, when the receive mode is set to <Manual RX> or <Ans. machine connect.>, whether to
automatically receive faxes after the machine rang a specified length of time.
RX start time
Remote RX
Enables/disables remote reception.
Remote RX ID
RX image reduction
Enables/disables automatic reduction of incoming faxes so that they fit in the selected paper.
Image reduction direction
RX start speed
Selects the fax reception speed.
RX report
Sets whether to print a reception report after each reception.

Other Settings

Read/write attribute

Selects whether to allow data to be written onto memory cards from a computer.
Important
If you set this setting to <Read/write mode>, card direct printing cannot be done. After you
finish operation of the memory card dedicated drive, be sure to revert this setting to <Read-
only mode>.
Volume control
Selects the volume.
Keypad volume
Selects the beep volume when pressing the buttons on the Operation Panel.
Alarm volume
Selects the alarm volume.
140 Changing the Machine Settings
Specifies the number of times the machine rings when <ON>
is selected.
Specifies the length of time until automatic reception is started
when <ON> is selected.
Specifies the remote reception ID when <ON> is selected.
Selects the image reduction direction when <ON> is selected.
Chapter 9