Sending Methods - Canon PIXMA MP830 User Manual

Sending Methods

There are four methods of sending faxes:
Sending from your machine (Memory sending)
Sending manually from your machine
Sending to multiple recipients from your machine in one operation (Sequential broadcasting)
Sending from your computer
This section describes how to use these methods.
Sending From Your Machine (Memory Sending)
1
Prepare for faxing.
(1) Press [ON/OFF] to turn on the machine.
See "Turning on the Machine" on page
(2) Load the document on the Platen Glass or the ADF.
Important
When sending a double-sided document, set the document on the Platen Glass. You
cannot scan double-sided documents from the ADF.
Note
For details on document requirements and how to load documents, see
Documents to Copy, Fax, or Scan" on page
(3) Press [FAX].
(4) Adjust fax settings as necessary.
See "Before Sending Faxes" on page
2
Start faxing.
(1) Dial the recipient's number using the Numeric buttons or speed dialing.
(2) Press [Color] for color sending, or [Black] for black & white sending.
Note
For details on how to use speed dialog, see
When the document was loaded on the Platen Glass:
(3) When the following message is displayed, load the next page on the Platen Glass.
If you have only one page of document to scan, go to step (6).
(4) Press [Color] or [Black].
(5) Repeat steps (3) and (4) to scan in all pages of the document.
(6) Press [OK].
108 Faxing
18.
19.
106.
"How to Use Speed Dialing" on page
"Loading
111.
Chapter 5