F3 Corpus
Maintenance and repairs
5. Push the hub cap (the design may vary depending on markets
and market regulations) in place.
6. Remove the blocks.
7. Lower the wheelchair using a jack or equivalent.
5.6.1.3
Drive wheel rim
Figure 201. The hub cap snaps when it is in place.
Figure 202. Fitting or removal of solid or pneumatic tyres.
A. Screw, ISO 4762 M6x25 8.8 Fe/Zn 5 C1/TUF-LOK DIN 267-28.
B. Rim, inner section.
C. Tyre (Inner tube only on pneumatic tyres).
228