Permobil F3 Corpus User Manual page 105

F3 Corpus
Create a sequence
• Select the command to use as the sequence initiator. In this
example, TV – ON.
• Select Learn Code by nudging the joystick to the right while the
command is highlighted.
• Point the TV remote control at the control panel's IR receiver
and press the On/Off button twice.
• After each successful learn operation, a tick momentarily appears
on the screen. Select Learn Code again.
• Point the DVD remote control at the control panel's IR receiver
and press the On/Off button twice.
• After each successful learn operation, a tick momentarily appears
on the screen. Select Learn Code again.
• Complete the sequence by highlighting Exit and nudging the
joystick to the left.
• Now the TV – ON command will have a tick and three dots
beside it, showing a learned sequence.
Getting to know your wheelchair
Figure 78. A tick followed by three dots showing a
learned sequence.
105