Joystick Error - Permobil F3 Corpus User Manual

F3 Corpus
4.2.6

Joystick error

4.2.6.1 Joystick error at startup
Do not move the joystick before, during or immediately after the
control system is switched on. If the joystick is moved from the
central position, a joystick error may be generated.
4.2.6.2 Joystick error LCD panel
While the control system checks if an error has occurred, the screen
image for a shifted joystick will be displayed for 5 seconds.
If the control system detects an error in the wheelchair electronics, a
diagnostics screen will appear. To enable the wheelchair to be driven
again, make sure the joystick is in the central position. Then switch
the wheelchair off and on again. If this does not work and the
diagnostic screen still appears, contact your service provider.
178
Preparing for use
Figure 159. Joystick moved from the central position.
Figure 160. The LCD diagnostics screen.