Top Control - Canon LV-7490 User Manual

Direct Operation
Choose VIDEO or
INPUT button on the top control, or the VIDEO or
the S-VIDEO button on the remote controller.
Before using these buttons, correct input source
should be selected through menu operation as
described below.
Menu Operation
1
Press the MENU button to display the
to select
button or the OK button.
2
or , and then press the OK button.
When video input signal is
VIDEO
connected to the VIDEO jack, select
VIDEO.
When video input signal is
connected to the S-VIDEO jack,
select
When the Auto input function is set to On 1 or On
2 in the Auto setup function, the input signal will be
searched automatically (p.47).
38
by pressing the
and then press the Point
VIDEO
.
VIDEO
VIDEO