Mounting The Device - Endress+Hauser Levelflex FMP55 Brief Operating Instructions

Levelflex FMP55 HART
Coax probes can be secured (fixed) at any point in the ground tube.
5.2

Mounting the device

5.2.1 Mounting devices with a flange
If a seal is used to mount the device, use uncoated metal screws to ensure good electrical
contact between the process flange and the probe flange.
5.2.2 Mounting rope probes
NOTICE
Electrostatic discharge can damage the electronics.
‣
Ground the housing before lowering the rope probe into the vessel.
Endress+Hauser
Mounting
A0012608
11