Endress+Hauser Levelflex FMP55 Brief Operating Instructions page 8

Incoming acceptance and product identification
NOTICE
Transport lock in the FMP55 with coax probe
‣
The coax tube is not firmly connected to the electronics housing in the FMP55 with coax
probe. It is fixed onto the mounting flange with two cable ties during transportation. These
cable ties must not be released during transportation or installation of the device to
prevent the spacer from sliding at the probe rod. They may only be removed immediately
before screwing the process connection flange into place.
8
Levelflex FMP55 HART
A0013920
Endress+Hauser