Table of Contents
Advertisement
Chapter 18
Note:
If you want all local devices can manage the router, just leave the
18 7 3
Remote Management
By default, the remote devices are not allowed to manage the router from the internet.
You can enable remote management over HTTP and/or HTTPS if needed. HTTPS is a
more secure way to access the router.
Note:
If your ISP assigns a private WAN IP address (such as 192.168.x.x or 10.x.x.x), you cannot use the remote management
feature because private addresses are not routed on the internet.
Follow the steps below to allow remote devices to manage the router over HTTPS.
1
Visit
http://tplinkwifi.net
for the router.
2
Go to
Advanced
Management
section.
3
Enable
Remote Management
HTTPS connection. Keep the
4
Set the client device allowed for remote management. Select
devices to manage the router. If you just want to allow a specific device to manage
the router, select
of the remote device.
5
Click Save.
or http://192.168.0.1, and log in with the password you set
>
System Tools
and
Remote Management via HTTPS
Port
as the default setting.
Only the Following IP/MAC Address
IP/MAC Address
field blank.
> Administration, and locate the
and enter the IP/MAC address
Manage Your Router
Remote
to allow for
All
to allow all remote
159
Hide quick links:
Advertisement
Table of Contents
