Local Upgrade; Backup And Restore Configuration Settings - TP-Link Archer AX11000 User Manual

Chapter 13
Tips: If there's a new and important firmware update for your router, you will see the notification (similar as shown
below) on your computer as long as a web browser is opened. Click UPGRADE, and log into the web management page
with the username and password you set for the router. You will see the

13. 1. 2. Local Upgrade

1. Download the latest firmware file for the router from www.tp-link.com.
2. Visit http://tplinkwifi.net, and log in with your TP-Link ID or the password you set for
the router.
3. Go to Advanced >
4. Focus on the Local Upgrade
firmware file, and click UPGRADE.
5. Wait a few minutes for the upgrade and reboot to complete.
Note: If you fail to upgrade the firmware for the router, please contact our

13. 2. Backup and Restore Configuration Settings

The configuration settings are stored as a configuration file in the router. You can
backup the configuration file to your computer for future use and restore the router to
a previous settings from the backup file when needed. Moreover, if necessary you can
erase the current settings and reset the router to the default factory settings.
1. Visit http://tplinkwifi.net, and log in with your TP-Link ID or the password you set for
the router.
2. Go to Advanced >
System > Firmware Upgrade.
section. Click
System Tools > Backup &
Firmware Upgrade page.
BROWSE to locate the downloaded new
Technical Support.
Restore.
Manage the Router
87