Specify The 6Rd Tunnel With Parameters Provided By Your Isp - TP-Link Archer VR2800 User Manual

Chapter 14
14 7 2

Specify the 6rd Tunnel with Parameters Provided by Your ISP

I want to:
How can I How can I
do that? do that?
Done!
Tips:
The way to set up DS-Lite tunnel is similar to that of 6rd tunnel. If you are provided with an IPv6-only WAN connection
and have signed up for DS-Lite tunnel service, specify the DS-Lite tunnel by referring to the steps above.
Specify the 6rd tunnel with the parameters provided by my 6rd
tunnel service provider.
1 Visit http://tplinkmodem.net, and log in with the account you
set for the router.
2 Go to Advanced >
3 Tick the check box, select
and select a WAN connection from the drop-down list.
4 According to the parameters provided by your ISP, choose
Auto or Manual. More parameters are needed if you choose
Manual.
5 Click Save.
Note:
If there is no available WAN connection to choose, make sure you have
connected to the internet and the connection type is not Bridge.
Now you can visit the IPv6 websites with the 6rd tunnel.
Specify Your Network Settings
Network > IPv6 Tunnel.
6rd as the tunneling mechanism
94