Table of Contents
Advertisement
Chapter 15
15. 6. 2. Specify the 6rd Tunnel with Parameters Provided by Your ISP
I want to:
Specify the 6rd tunnel with the parameters provided by my 6rd tunnel service provider.
How can I do that?
1. Visit http://tplinkmodem.net, and log in with your TP-Link ID or the password you
set for the router.
2. Go to
Advanced
3. Tick the check box, select
connection from the drop-down list.
4. According to the parameters provided by your ISP, choose
parameters are needed if you choose Manual.
5. Click Save.
Note:
If there is no available WAN connection to choose, make sure you have connected to the internet and the connection
type is not Bridge.
Done!
Now you can visit the IPv6 websites with the 6rd tunnel.
Tips:
The way to set up DS-Lite tunnel is similar to that of 6rd tunnel. If you are provided with an IPv6-only WAN connection
and have signed up for DS-Lite tunnel service, specify the DS-Lite tunnel by referring to the steps above.
>
Network
>
IPv6
Tunnel.
6rd
as the tunneling mechanism and select a WAN
Specify Your Network Settings
Auto
or Manual. More
97
Hide quick links:
Advertisement
Table of Contents
