Safety Data; Enerpace® Hf Hydraulic Oil - Safety Data; Molylithium Grease Ep 3753 - Safety Data - Stanley AV 50 Instruction And Service Manual

Hydro-electric power tool
Table of Contents

Advertisement

Available languages
  • EN

Available languages

  • ENGLISH, page 1
E N G L I S H
O R I G I N A L I N S T R U C T I O N

7. SAFETY DATA

7.1 ENERPACE® HF HYDRAULIC OIL - SAFETY DATA
FIRST AID
SKIN:
Unlikely to cause harm to the skin on brief or occasional contact but prolonged or exposure may lead to dermatitis. Wash
skin thoroughly with soap and water as soon as reasonably practicable. Remove heavily contaminated clothing and wash
underlying skin.
ORAL:
Unlikely to cause harm if accidentally swallowed in small doses, though larger quantities may cause nausea and diarrhea.
If contamination of the mouth occurs, wash out thoroughly with water. Except as a deliberate act, the ingestion of large
amounts of product is unlikely. If it should occur, do not induce vomiting; obtain medical advice. Take person to nearest
medical centre.
EYES:
Unlikely to cause more than transient stinging or redness if accidental eye contact occurs. Wash eyes thoroughly with
copious quantities of water, ensuring eyelids are held open. Obtain medical advice if any pain or redness develops or
persists.
MEDICAL ADVICE:
Treatment should in general be symptomatic and directed to relieving any effects.
Note: High Pressure Applications:
Injections through the skin, resulting from contact with the product at high pressure, constitute a major medical emergency.
Injuries may not appear serious at first but within a few hours tissue becomes swollen, discolored and extremely painful with
extensive subcutaneous necrosis.
Surgical exploration should be undertaken without delay. Thorough and extensive debridement of the wound and
underlying tissue is necessary to minimize tissue loss and prevent or limit permanent damage. Note that high pressure may
force the product considerable distances along tissue planes.
DISPOSAL
Remove all spills with inert absorbent material. Ventilate spill area. Place contaminated materials in a disposable container
and dispose in a manner consistent with local regulations.
FIRE
FLASH POINT: 200°C.
Extinguish with either dry chemical, foam or carbon dioxide. Do not enter confined space without self contained breathing
apparatus.
HANDLING
Use barrier cream or oil resistant gloves.
STORAGE
Undercover and consistent with local regulations for inflammable material.

7.2 MOLYLITHIUM GREASE EP 3753 - SAFETY DATA

Grease can be ordered as a single item, the part number is shown in the Service Kit page 12.
FIRST AID
SKIN:
As the grease is completely water resistant it is best removed with an approved emulsifying skin cleaner.
INGESTION:
Ensure the individual drinks 30ml Milk of Magnesia, preferably in a cup of milk.
EYES:
Irritant but not harmful. Irrigate with water and seek medical attention.
FIRE
FLASH POINT: Above 220°C.
Not classified as flammable.
Suitable extinguishing media: CO
, Halon or water spray if applied by an experienced operator.
2
ENVIRONMENT
Scrape up for incineration or disposal on approved site.
20

Advertisement

Table of Contents
loading

This manual is also suitable for:

73435-02000

Table of Contents