Changing The Default Settings; Viewing Copy Settings - Canon imageCLASS D1370 Basic Operation Manual

Changing the Default Settings

The default settings are a set of standard settings
predetermined by the machine. These settings become
effective when the machine is turned OFF and ON, or when
[ ] (Reset) is pressed to revert to the default settings. You
can change the following default settings based on your
needs.
Keys to be used for this operation
1
Press [ ] (Menu).
2
Select <Copy Settings> using [ ] or [ ] and
press [OK].
Menu
Preferences
Timer Settings
Common Settings
Copy Settings

Viewing Copy Settings

You can confirm the settings of copy function which have been
changed from the default setting.
Keys to be used for this operation
1
Press [ ] (View Settings).
The current settings in the machine are displayed.
* If you have not changed the default settings, the message <No
settings have been changed.> is displayed.
View Settings
Density: +1
Original Type: Text/
Sharpness: +1
3-12
Menu
OK
Back View Settings
. . .
3
Select <Change Defaults> using [ ] or [ ] and
press [OK].
Copy Settings
Change Defaults
4
Select the item using [ ] or [ ] and press [OK].
Change Defaults
<Apply>
No. of Copies: 1
+ -
Density: 0
Original Type: Text
For more information, see "Copy Settings" (→P. 3-4).
5
Select <Apply> using [ ] or [ ] after you have
specified the setting and press [OK].
Change Defaults
<Apply>
No. of Copies: 1
+ -
Density: 0
Original Type: Text
6
Press [ ] (Menu) to close the menu screen.
2
Check your settings.
NOTE
You can change those settings
Select items and press [OK] to display a setting screen for those
items, where you can change those settings.
3
Press [ ] (Back) to return to the standby display.
. . .
. . .