Canon imageCLASS D1370 Basic Operation Manual page 7

Copy Print
There are a variety of network settings that are explained in the e-Manual. Since the machine has a built-in network
board, you can print, fax, and scan from a computer via a network. You can also perform efficient management by
configuring the machine using the Remote UI.
Below is a quick overview of highlighted network settings that you can utilize in your everyday use.
Various Network Settings
Basic Network Settings
Setting the IP address (IPv4)
- IP address
- Subnet mask
- Gateway address
As needed
Setting the IP address (IPv6)
Security Settings
Administration Settings
System administrator settings
- Manager ID/PIN
Device information
- Device name/Installation site
Dept. ID management
- Department ID/PIN/
Function restriction
- Unknown ID job management
Remote UI On/Off
Configuring Using the Remote UI
Remote UI Functions
Checking the status and information
of the machine
Job Management
Preferences
Function settings
System settings
Address book management
Quick View- Perform Useful Tasks
Fax Scan
For details, see "Network Settings" in the
Configuration for communicating
with a computer
Configuring the machine
- LPD, RAW, WSD
As needed
Configuring a computer
- Port settings
- Sharing settings for the printer
For details, see "Security" in the
Restricting Connection
to a Network or Computer
IP address filtering
MAC address filtering
SNMP settings
Allowing the HTTP communication
Setting a port number
Dedicated port settings
Restricting USB connection
Restricting job operations
For details, see "Setting and Managing from Computer" in the
How to start the Remote UI
1 Start the web browser.
2
Enter "http://<the IP address of the
machine>/" in the address field, and
then press the [ENTER] key on your
keyboard.
Network Settings & Remote UI
Miscellaneous Settings
Communication mode/
Communication speed
Waiting time for connection
DNS
WINS server
Printing Functions/Restricting Destination
Operations/Sending Functions
Secure printing
Address book PIN
Restricting new destinations
Restricting the PC fax
Restricting sending from history
Fax number confirmation re-entry
Restricting sequential broadcast
Restricting displaying the job history
e-Manual → Starting the Remote UI
3 Log on to the Remote UI.
(1) Select [Management Mode] or [End-User Mode].
(2) For [Management Mode], enter [System Manager ID]
and [System Manager PIN].
For [End-User Mode], enter [User Name].
(3) Click [Log in].
(1)
(2)
(1)
(2)
e-Manual.
e-Manual.
e-Manual.
(3)
vii