Rx Mode; Auto Mode - Canon imageCLASS D1370 Basic Operation Manual

RX Mode

This section describes how to receive faxes.

RX Mode

The machine allows you to receive faxes automatically or manually in several different ways.
See the following flowcharts to select the receive mode that you want to use.
The default setting is <Auto>.

Auto mode

You can receive faxes automatically.
The receive mode varies depending on whether an external telephone is connected to the machine or not.
Operation for when an incoming call is received
Without an external telephone connected
When the call is a fax
The machine receives
the fax automatically.
An incoming call rings for the specified number of times.
When you pick up the handset while the
incoming call rings
When the call is a fax
You can hear a
beep.Following the
procedure below, receive the
fax.
(1) Press [Fax].
(2) Select <Start Receiving>
using [ ] or [ ] and
press [OK].
(3) Hang up the handset.
* You can set the incoming call ring time using "Incoming Ring" (→P. 6-25).
When the call is a voice call
The machine does not respond.
When you do not pick up the handset while
the incoming call rings
When the call is a When the call is a fax
voice call
You can start talking
as is.
With an external telephone connected
The machine receives the
fax automatically.
*
When the call is a
voice call
You cannot start talking.
6-11