Sending Scanned Documents To A File Server (D1370 Only) - Canon imageCLASS D1370 Basic Operation Manual

6
Specify the e-mail settings as needed.
The following settings can be changed.
For details on the setting procedure, see "Scanning" in the e-Manual.
• Subject/Body
• Reply-to
• Priority
The settings specified here are effective only for the current task.
To make the settings effective for all e-mail send operations, see
"Scanning" in the e-Manual.
7
Press [ ] (Start).
Scanning starts.
8
To continuously scan the document, press [
(Start).
Scan Next: Press Start
<Start Sending>
<Cancel>
Destinations: 1
No. of TX Pages: 1
To Cancel the scan
(1) Select <Cancel> using [
(2) Select <Yes> using [
To confirm the destination
Select <Destinations: > using [
To confirm the number of transferred pages
Select <No. of TX Pages> using [
9
Select <Start Sending> using [ ] or [ ] and
press [OK].
Scan Next: Press Start
<Start Sending>
<Cancel>
Destinations: 1
No. of TX Pages: 1
The E-mail is sent.
7-6
] or [ ] and press [OK].
] or [ ] and press [OK].
] or [ ] and press [OK].
] or [ ] and press [OK].
Sending Scanned Documents to a File
Server (D1370 Only)
Sending scanned documents to a file server.
This section describes the basic procedure.
Note
Preparation for Scanning (File Server)
You can send scanned documents to a file server. You can convert
scanned documents into TIFF files and send them a file server.
Before sending to a file server, see "Network Settings" in the
e-Manual and configure the send settings.
]
Keys to be used for this operation
1
Place your document.
"Loading Paper" (→P. 2-9)
"Supported Document Types" (→P. 2-2)
2
Press [
3
Select <Windows (SMB)> using [ ] or [ ] and
press [OK].
Select the scan type.
Memory Media
E-Mail
Windows (SMB)
4
Specify the destination.
Specify destinations in the following ways.
For details on the setting procedure, see "Scanning" in the e-Manual.
• by selecting a one-touch key
• by selecting a coded dial code
• by selecting a group address
• from the Address book
5
Specify the scan settings based on your purpose
of the scan.
The following settings can be changed.
For details on the setting procedure, see "Scanning" in the e-Manual.
• Scan size
• Color Mode
• File Format
• Density
• Original orientation
• Original Type
• 2-Sided Original
• Sharpness
• Data Size
The settings specified here are effective only for the current task. To
make the settings effective for all send operations, see "Scanning" in
the e-Manual.
SCAN
OK Start
].