Calling And Copying Mode Memory - Canon imageCLASS D1370 Basic Operation Manual

3
Select <Register/Delete> using [ ] or [ ] and
press [OK].
Mode Memory
Register/Delete
Mode 1
Mode 2
Mode 3
4
Select a Mode Memory to delete using [ ] or [ ]
and press [OK].
Register/Delete
Mode 1
Mode 2
Mode 3
Mode 4
5
Select <Delete> using [ ] or [ ] and press [OK].
Mode 1
<Apply>
<Delete>
No. of Copies: 1
+ -
Density: 0
6
Select <Yes> using [ ] and press [OK].
Delete?
Yes No

Calling and Copying Mode Memory

NOTE
Calling Mode Memory
• When a new Mode Memory is called, all copy settings are
replaced with that Mode Memory settings.
• After the Mode Memory is called, you can change and copy the
settings as you like.
Keys to be used for this operation
COPY
1
Place your document.
"Placing Documents" (→P. 2-4)
"Supported Document Types" (→P. 2-2)
2
Press [ ].
3
4
5
OK Start
Select <Mode Memory> using [ ] or [ ] and
press [OK].
Copy: Press Start
1
100% LTR
1
Erase Frame: Off
+ -
Sharpness: 0
Mode Memory: Off
Select a Mode Memory to call using [ ] or [ ]
and press [OK].
* From Mode 1 to Mode 4, you cannot select any Mode Memory
which is not registered.
Mode Memory
Mode 1
Mode 2
Mode 3
Mode 4
Press [ ] (Start).
3-11