Safety Precautions - AGFA CR 35-X User Manual

Safety precautions

General safety instructions
•
For software and other technical platforms, and/or if valid in combination
with any consumable, which constitute, after installation, a system for the
interpretation of medical image data by trained and qualified
professionals: it is the user's responsibility to ensure that image quality,
display quality, environmental lighting and other possible distractions are
consistent with the clinical application.
•
Make sure that the CR 35-X is constantly monitored in order to avoid
inappropriate handling, especially by children.
•
Only trained service personnel must make repairs. Only authorized service
personnel must make changes to the CR 35-X.
•
If there is any visible damage to the machine casing, do not start nor use
the
CR 35-X.
•
If you want to connect the CR 35-X with other devices, components or
assemblies and if the technical data do not allow determining whether the
combination with these devices, components or assemblies involves
hazards, you must consult the respective manufacturers to avoid danger for
operating personnel or the environment.
•
Do not override or disconnect the integrated safety features.
•
As is the case for all technical devices, the CR 35-X must be operated, cared
for and serviced correctly.
•
If you don't operate the CR 35-X correctly or if you don't have it serviced
correctly, Agfa is not liable for resulting disturbances, damages or injuries.
•
When installing the CR 35-X, care must be taken to ensure that there is
either a mains plug or an all-cable disconnecting device in the internal
installation fitted near the CR 35-X and that it is easily accessible.
•
If you notice conspicuous noise or smoke, disconnect the CR 35-X
immediately.
• Check that the mains voltage is within the specified range of the self
adapting power supply of the machine.
4454C EN 2013-05-14
CR 35-X D
IGITIZER
13
Safety precautions