AGFA CR 35-X User Manual page 15

4454C EN 2013-05-14
Safety warning, indicating that the CR 35-X manuals should
be consulted before making any connections to other
equipment. The use of accessory equipment not complying
with the equivalent safety requirements of this Digitizer may
lead to a reduced level of safety of the resulting system.
Consideration relating to the choice of accessory equipment
shall include:
• Use of the accessory equipment in the patient vicinity,
• Evidence that the safety certification of the accessory
equipment has been performed in accordance with the
appropriate IEC 601-1 and IEC 601-1-1 harmonized
national standard.
In addition all configurations must comply with the medical
electrical systems standard IEC 601-1-1. The party that makes
the connections acts as system configurator and is responsible
for complying with the systems standard.
If required contact your local service organization.
In order to reduce the risk of electric shock, do not remove any
covers.
Caution hot:
Keep hands clear from the erasure unit.
Supplementary protective earth connector:
Provides a connection between the CR 35-X and the potential
equalization busbar of the electrical system as found in
medical environments. This plug should never be unplugged
before the power is turned off and the power plug has been
removed.
It is recommended to use the supplementary protective earth
connection as additional safety measure.
Intergrounding connector:
Provides a connection between the Digitizer and other
equipment which might exhibit minor ground potential
differences. These differences may degrade the quality of
communication between different equipment. Never remove
connections to this terminal.
Protective earth (ground):
Provides a connection between the Digitizer and the protective
earth of the mains. Do not remove this connection, because
this will have a negative influence on the leakage current.
Power On
CR 35-X D
IGITIZER
15
Safety precautions