Microphone Connection - FONESTAR MPZ-6480RGU Instruction Manual

MIX
AUX
ON
USB CHIME PROG
EN
INSTRUCTIONS FOR USE
M-64 MICROPHONE CONNECTION
Connect the M-64 microphone OUTPUT to the PRIORITY MIC M-64 INPUT 1 of the MPZ-6480RGU amplifier
using the data cables provided. Activate the microphone capsule power supply by pressing the PHANTOM
+24 V button on INPUT 1, located on the rear panel of the MPZ-6480RGU amplifier.
It is possible to connect a maximum of 3 M-64 microphones to the system. These microphones are connected
in cascade between the LINK output of the first microphone and the OUTPUT of the next.
MPZ-6480RGU
M-64 (1)
CHIME PRIORITY
OFF
MASTER SLAVE
ON
The M-64 microphone can be assigned maximum system priority (priority 1) located on
the PRIORITY selector on the rear panel of the M-64 microphone in the ON position.
Likewise, the MASTER or SLAVE function of each of the microphones can be chosen.
In MASTER mode the M-64 microphone has priority paging over the other M-64
microphones even if the BUSY indicator is lit.
PAGING WITH THE M-64 MICROPHONE
To talk, press and hold the M-64 microphone TALK button while delivering the message. If the BUSY
indicator is on you must wait until it turns off before you can speak, given that another M-64 microphone is
in use at that moment.
In MASTER mode the M-64 microphone has priority paging over the other M-64 microphones even if the
BUSY indicator is on.
MZ-648 MICROPHONE CONNECTION
Connect the MZ-648 microphone OUTPUT to the PAGING MIC MZ-648 INPUT 2 of the MPZ-6480RGU
amplifier using the data cables provided.
The microphone requires 15 V DC power supply provided by the mains adapter supplied.
It is possible to connect a maximum of 3 MZ-648
in cascade between the LINK output of the first microphone and the OUTPUT of the next.
MAX
15 V DC, 0.8 A USB CHIME PROG
TEL
PAGING AMP ZONES MASTER INPUT MZ-648 MSG AMP IN
100 V INPUT 100 V OUTPUTS OUTPUT RINGER PAGING PRIORITY
+ +
Z6 Z5 Z4 Z3 Z2 Z1 4
COM COM
CAUTION: SHOCK HAZARD - DO NOT OPEN
RISK OF FIRE-REPLACE FUSE AS MARKED
SINGLE ZONE: 120 W MAX.
TOTAL ZONE: 480 W MAX.
GND
~110-120 V AC. 50/60 Hz FUSE: T12 AL 250 V
~220-240 V AC. 50/60 Hz FUSE: T6.3 AL 250 V
EXTERNAL CONTROL
CONNECTION
POWER REMOTE
MESSAGE BANK 1-6
POWER CONSUMPTION: 960 W
M-64 (2)
M-64
PRIORITY MICROPHONE
OUTPUT LINK
MIX MAX
AUX
ON
PHANTOM
activated
PAGING REC INPUT MIC/LINE INPUTS
OUTPUT OUT
INPUT 3 M-64 PRIORITY MIC
INPUT 1
AUX 2 AUX 1 GAIN GAIN
LINE MIC LINE
PHANTOM PHANTOM
+24 V +24 V
INPUT 4 MZ-648 PAGING MIC INPUT 2
CAUTION GAIN GAIN
RISK OF ELECTRIC SHOCK
DO NOT OPEN
LINE MIC LINE
PHANTOM PHANTOM
+24 V +24 V
LINK PAGING MIC
MZ-648
INPUT 2
DATA
MSG CHI PROG
(3 MIC MAX.)
USB
M-64
PRIORITY MICROPHONE
OUTPUT LINK
CHIME PRIORITY
OFF
MASTER SLAVE
ON
microphones to the system.
- 6 -
ON
15 V DC, 0.8 A USB CHIME PROG
USB MSG CHI PROG
FM
MPZ-6480RGU
ZONE AMPLIFIER
MIC
480 W RMS
PRIORITY MIC
M-64 INPUT 1
OUTPUT
MIC
24 V DC
0.2 A MAX.
+ USB MSG CHI PROG
-
PRIORITY MIC M-64
INPUT 1
PRESS MIC 1 PHANTOM (3 MIC MAX.)
M-64 (3)
OUTPUT LINK
CHIME PRIORITY
OFF
MASTER SLAVE
ON
CHIME PROG
USB
CHIME PRIORITY
OFF
ON
These microphones are connected
MIX MAX
AUX
USB MSG CHI PRO
USB MSG CHI PRO
OFF: SLAVE
CHIME PROG
USB
ON: MASTER
MSG
M-64
OFF
PRIORITY MICROPHONE
ON
CHIME PRIORITY
OFF
MASTER
ON
MASTER SLAVE
OF
MSG ON