Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for FONESTAR MAZ-4160
Summary of Contents for FONESTAR MAZ-4160
- Page 1 M Z-4160 MULTIZONE AMPLIFIER WITH 4 OUTPUT ZONES INSTRUCTION MANUAL...
- Page 2 We take this opportunity to thank you for buying this product. We recommend you read the instruction manual before switching on the machine and follow the instructions that are given. Keep the manual for future reference. SECURITY AND THE ENVIRONMENT ELECTRICAL SECURITY Check that the current in the mains connection where the machine is to be installed corresponds to the power supply of the machine.
-
Page 3: Exemption Of Liability
The characteristics of the equipment and the content of the manual can change without forewarning. FONESTAR, S.A. does not assume responsibilities regarding the inappropriate use of the equipment or the information supplied in this instruction manual, and specifically disclaims any implied liability for marketability or fitness for any other use. -
Page 4: Controls And Functions Front Panel
DESCRIPTION Multizone amplifier with 5-input channel to 4-output zone matrix with independent volume control. Suitable for commercial installations with several zones and different music programmes. CONTROLS AND FUNCTIONS FRONT PANEL 1.- CH 1 to CH 4 (GAIN, TREBLE, BASS, MUTE, VOL, ZONE SELECTOR): input zone controls with the following functions: GAIN: adjusts the gain of the inputs to adapt them to the mix levels from the amplifier. -
Page 5: Rear Panel
REAR PANEL 1.- 115 V/230 V: power supply voltage selector. 2.- MONITOR (Line out): line level output to monitor the output. 3.- MONITOR (1 W, 8 Ω): output for connection of low impedance loudspeaker 8 Ω to monitor the output. 4.- PRIORITY: CH 1 input channel priority. - Page 6 CONNECTION Make the connections with the amplifier and all the audio system components switched off and disconnected from the power supply. Firstly, connect the audio sources to the inputs. For example, connect a dynamic microphone to the CH1 input and select the MIC position on the input sensitivity selector. If using a preamplified desktop microphone, select the LINE position.
- Page 7 To increase the power in a certain zone, connect the line output from the selected zone to the input on a power amp., for example model FS-2601E. Use the 100 V high impedance line output on the power amp to connect the loudspeakers as shown in the following connection diagram. Example of the connection of the line output from a zone to the FS-2601E power amp.
-
Page 8: Block Diagram
BLOCK DIAGRAM - 8 -... - Page 9 PROTECTION The amplifier has temperature and overload protection. When protection is activated the output signal is cut off. In this case switch the amplifier off, check why the protection has been activated, leave the system for a while and then switch it on again. PRIORITY IN THE INPUTS The priority function automatically reduces the input levels with less priority so that the message broadcast by those of greater priority can be heard clearly.
-
Page 10: Technical Specifications
The next level of priority is the CH 1 input over inputs CH2 to CH5. To activate priority in the CH1 input we must close the PRIORITY contact found on the back panel, using the button or switch. TECHNICAL SPECIFICATIONS MAZ-4160 Matrix and multi-channel amplifier. CHARACTERISTICS 5-input channel to 4-output zone allocation matrix. -
Page 11: Warranty
This product has been tested and has passed the corresponding quality control prior to being put on the market. FONESTAR guarantees the suitability of the product for its specified use during a period of 2 years from the delivery date and commits itself to repair or substitute the goods as expressed in the Spanish law ‘La Ley General para la Defensa de los... - Page 12 www.fonestar.com...
Need help?
Do you have a question about the MAZ-4160 and is the answer not in the manual?
Questions and answers