Table of Contents
Advertisement
Result code
Communication
(Communication
report result
result)
column
62
F code bulletin
board password
discrepancy
63
The other party
has no function
of F code.
64
F code is not
accepted.
67
F code
password
discrepancy
68
BOX NO. NG
69
Memory over
• When communication result is OK, the communication result sub
code 1 and sub code 2 are 0000.
• < > indicates the communication means. <Send>, send; <Receive>,
receive; <Poll>, polling; <Bulletin>, bulletin board
The status code from the modem in V.34 mode is indicated with the
communication result sub code 1 (top 2 digits). However, the commu-
nication sub code 1 is 00 in communication other than V.34 mode.
3. List of buzzer sounds in case of FAX abnormality
– : Long sound
• : Single sound
Example: In case of TEL/LIU connection abnormality
{{– •
• • • •} repeats {Pee • pi • pause • pi • pi • pi • pi}.
Beep sound
Information content
pattern
– •
• •
Expanded memory connection
abnormality
– •
• • •
Internal DMA transfer abnormality
– •
• • • •
TEL/LIU PWB connection abnormality
– • •
•
Program ROM (main section) writing not
completed
– • •
• •
Program ROM (font section) writing not
completed
– • • •
•
Work DRAM (IC13, 14) abnormality
– • • •
• •
SRAM (IC41) abnormality 1
– • • •
• • •
SRAM (IC41) abnormality 2
– • –
–
MCU upload no responding
– • • –
System abnormality 1
– • • • –
System abnormality 2
Communication interruption
content
When the pass code (PWD)
does not coincide in bulletin
board, <Bulletin>
When the other party machine
does not have DIS bit 49 (sub
address capacity) in F code
transmission, <Send>. Check
that the other party machine
conforms to F code.
When F code is transmitted,
<Send>
1) When DCN is received for
SUB, check the BOX
number.
2) When DCN is received for
SID, check BOX number
and the pass code.
When F code is received,
<Receive>
When the F code relay
broadcast function or the F
code confidential reception
function is inhibited with soft
switches.
When the pass code (SID)
does not coincide in F code
reception, <Receive>
When a BOX number that is
not registered is instructed
(SUB discrepancy) in F code
reception, <Receive>
Memory over in quick online
sending
3:
Pause
Expanded memory insertion abnormality
Internal DMA transfer operation
abnormality
TEL/LIU PWB is not connected to the
main PWB.
Program ROM (main section) data
abnormality
Program ROM (font section) data
abnormality
Work DRAM abnormality
MCU PWB does not respond.
Various internal operation abnormality
Various internal operation abnormality
AR-FX7 TROUBLE CODE LIST 10 - 3
<Communication result sub code>
Result
Communication interruption content
code 2
02
EOL time over
03
Carrier detection time over
06
Memory image decoding error
07
Memory image decoding error
08
Time up between frames in phase C
11
Polarity reversion detection
12
Invalid command reception
13
Time over (1min timer/6sec timer)
14
PUT error
15
In V.34 mode, time up is generated when
shifting from Primary to Control.
16
In V.34 mode, time up is generated when
shifting from Control to Primary.
20
Polarity reversion detection
21
Invalid command reception
22
Fall back retry number over
23
Resend over of the number of times of
command retry
24
Time over (T5 timer)
25
Time over (T5 timer) in V.34 mode
26
Time over occurrence during shift from
Primary to Control in V.34 mode
28
Modem chip answering NG
Detail
Expanded memory reinsertion
PWB solder trouble, PWB parts trouble
Download retry
Download retry
IC13, 14: PWB solder trouble, PWB parts
trouble
IC41: PWB solder trouble, PWB parts
trouble
IC41: PWB solder trouble, PWB parts
trouble
MCU PWB - main PWB connection
PWB solder trouble, PWB parts trouble
PWB solder trouble, PWB parts trouble
Transmission/
Reception
Reception
Reception
Reception
Transmission
Transmission/
Reception
Reception
Reception
Reception
Reception
Reception
Reception
Transmission
Transmission
Transmission
Transmission
Transmission
Transmission
Transmission
Transmission/
Reception
Trouble content
Advertisement
Table of Contents
