Playing Voices; M Playing Voices; Playing Two Voices Simultaneously-Dual; Playing Different Voices With Both Hands-Lower - Medeli DP370 Owner's Manual

Aw_DP370_Manual_G07_161223.pdf 12 17/1/4 14:34

Playing Voices

The instrument features 600 exceptionally realistic voices. Please
refer to Voices List.
Playing Voices
1. In idle status, holding down the [SHIFT] button, then press one of
the voice direct button to enter the voice mode. LCD will display
the name and number of the current voice and highlights "R1".
2. Use the data dial, [+/YES]/ [-/NO] button to select the voice you
want to play. You can also use the voice direct button to select a
voice.
3. You can play the keyboard and listen to the wonderful voice.
Note:
When the Dual and Lower functions are on, hold down [SHIFT]
button, then press one of the voice select buttons to shift the voice
source between R1, R2 and L1. The selected one will be highlighted
on LCD.

Playing two voices simultaneously-DUAL

1. In idle mode, press [DUAL] button to turn on dual voice. LCD
displays current voice name and number, and highlights "R2".
2. When "R2" is highlighted, use the data dial, the [+/YES], [-/NO]
C
button or voice direct button to select the dual voice you want to
M
play.
Y
3. Play the keyboard, you will hear two different voices sounded
CM
simultaneously in a layer. It seems like two instruments playing at
MY
the same time.
CY
Note:
CMY
When the keyboard has been split, only the right hand area will play
K
the dual voice.
Play Different Voices with Both
hands-LOWER
1. In idle mode, press [LOWER] button to turn on lower voice. The
keyboard is split into two independent areas, which have different
voices. LCD displays the left hand voice name and number, and
highlights "L1".
2. When "L1" is highlighted, use the data dial, the [+/YES], [-/NO]
button or voice direct button to select the lower voice you want to
play.
3. Play the keyboard with both hands, and you will hear two different
voices from the two areas.
Note:
The right hand voice does not change when you change lower voice.
Split Point
The Point on the keyboard that separates voice L1 and voice R1/R2 is
called the "split point". The split point is set to F#3/G3 at the factory
setting. However you can set this to any key you want. Please refer to
KeySplit setting for split point.
12