Door Switch; Temperature Sensor; Automatic Door Lock; Door Contact Switch - Miele H350 Technical Information

Technical Information
4.1.6

Door Switch

If the door of the oven is opened during cooking, the door switch sends a
signal to the electronic control unit. The electronic control unit effects the
following measures.
•
It turns off the convection fan
•
It turns off the applicable heater(s)
•
It reduces the cooling fan speed to the lowest speed (run-out speed),
as long as the oven temperature remains above approximately 160° F
4.1.7

Temperature Sensor

The temperature sensor is a platinum sensor. It resistance rises
proportionately as the oven temperature rises.
4.1.8

Automatic Door Lock

After the start of the pyrolitic (self cleaning) process the door is
mechanically locked with a door latch operated by a locking device. The
door can only be opened after the pyrolitic cycle is complete and the oven
temperature has dropped below approximately 390° F
4.1.9

Door Contact Switch

If the door is opened during cooking, the electronic registers this via the
door contact switch and the following occurs:
•
The convection fan is switched off
•
Heating is switched off
•
The cooling fan speed is reduced to run-on speed as long as the oven
temperature remains above approximately 130° F
26
Novotronic Models