Introduction - Permobil Total Control Head Array User Manual

1

Introduction

The Total Control Head Array is intended to be installed on
Permobil power wheelchairs equipped with R-net electronics.
Permobil power wheelchairs are intended for people limited to
a seated position. For additional information regarding your
wheelchair, refer to any other documentation received with
your wheelchair or contact your Permobil dealer.
All information, pictures, illustrations and specifications are
based upon the product information available at the time these
operating instructions were printed. Pictures and illustrations
used in these operating instructions are representative examples
and not intended to be exact depictions of the various parts of
the Total Control Head Array. Permobil reserves the right to
make changes to the product without prior notice.
4 - Introduction