Return Filter Element Replacement - BYD ECB16 Operator's Manual

REGULAR INSPECTION AND MAINTENANCE

Return Filter Element Replacement

1. Put the clean cloth around the return filter.
2. Unscrew the cover plate and pull the out filter element.
3. Clean the cover plate and check if the seal and the o-ring are in good condition, replace
them if necessary.
4. Check if the spread and the o-ring of the new element are in good condition, replace
them if necessary.
5. Use clean hydraulic oil to lubricate the the o-ring of the new element, fit the new element
carefully and screw the cover plate.
6. After replacement, operate the hydraulic system to check if there is any leakage.
OPERATOR MANUAL
https://www.forkliftpdfmanuals.com/
Cover Plate
Seal
Element
Element O-ring
O-ring
86