Table of Contents
Advertisement
Hydraulic Oil Level
1.
Pull out the oil dipstick, use the clean cloth to wipe the oil on it, and then insert it back.
2.
Pull out the oil dipstick again, and then see if the oil level is between two marks.
3.
If the oil level is under the lower mark, take of the return filter cap and refill the oil.
Return Filter Element State Indicator
The indicator of the return filter indicates the state of the filter element.
1.
Green area: the element is in good condition.
2.
Years area: the element's performance drops and it's better to be replaced within a short
time.
3.
Redarea: the element is invalid, it must be replaced immediately.
CAUTION
The element should be replaced if it drops or it's invalid at any time.
https://www.forkliftpdfmanuals.com/
1
2
3
85
ECB16 ECB18
OM-ECB162015006-EN-US
Advertisement
Table of Contents
