Working Equipment; Mast Channel Cleaning And Adjustment; Tilt Rotating Pin Lubrication - BYD ECB16 Operator's Manual

REGULAR INSPECTION AND MAINTENANCE

Working Equipment

Mast Channel Cleaning and Adjustment

1. Check and clean the inner chamber of the mast channel. Make sure that the inner
chamber is clean, flat and well lubricated.
2. Check gaps between the inner and the outer mast, and use the adjusting screw to ensure
gaps being equal.

Tilt Rotating Pin Lubrication

1. Lift the mast and tilt it until the grease nipples are exposed.
2. Add lubrication grease.
3. Fully lubricate the axis by tilting the mast several times.
OPERATOR MANUAL
https://www.forkliftpdfmanuals.com/
80