Table of Contents
Advertisement
2.
Take out debris embedded in the tire.
3.
If the four tires are unevenly worn, or the tires are found damaged, or the rims are bent,
then replace the tires.
Working Equipment
1.
Check the cylinders, oil pipes, and hoses for oil leakage.
2.
Check the working equipment for deformation and damage. check if the bolts are
securely fastened.
Note
If oil leakage occurs, confirm the location of oil leakage and contact the BYD after sales
service.
Hydraulic System
1.
Check the hydraulic oil level in the oil tank.
2.
Check the state of the filter indicator.
Seat
The seat belt provides protection to the operator. Regular inspection can ensure its correct
working in case of an emergency.
1.
Pull the seat belt fully out and check for fraying.
2.
Check the locking device (belt buckle) of the seat belt, and check if the retractor functions
properly.
3.
Check if the seat can be adjusted forward and backward, and if the back rest angle and
seat suspension can be adjusted.
DANGER
In the case of seat belt failure, stop operating the forklift and replace the seat belt.
Multifunction display
1.
Check if the battery voltage and status of charger displayed are correct.
2.
Check if any error/fault indicator appears on the instrument panel.
3.
Set the direction control switch to "forward", "neutral" and "reverse" and check if
corresponding gear indicator appears.
https://www.forkliftpdfmanuals.com/
73
ECB16 ECB18
OM-ECB162015006-EN-US
Advertisement
Table of Contents
