Table of Contents
Advertisement
OPERATING THE FORKLIFT
Adjusting the steering wheel
1.
Release the steering wheel stop lever and the steering wheel can now be adjusted
backwards/forwards.
2.
Set the steering wheel to the required position, and then fix the stop lever in position.After
adjustment, try moving the steering wheel to check if it is secured.
Ignition Switch
OFF: position indicates that the power is cut off and allows entering and removing the key.
ON: position indicates that the forklift is switched on and the display unit is lit.
Note
Before starting the forklift, pull up the Emergency Disconnect Switch (in red). Otherwise the
forklift cannot be operated.
OPERATOR MANUAL
https://www.forkliftpdfmanuals.com/
48
Advertisement
Table of Contents
