Working Equipment Controlling System; Mechanical Levers - BYD ECB16 Operator's Manual

OPERATING THE FORKLIFT

Working Equipment Controlling System

Mechanical levers

1. Lift: push the lever forward to lower, pull the lever backward to lift.
2. Tilt: push the lever forward to tilt forward, pull the lever backward to tilt backward.
3. Side Shift: push the lever forward to shift leftward, pull the lever backward to tilt shift
rightward.
4. Other Attachments: According to the specific attachment.
5. Emergency Disconnect Switch: Press down the emergency disconnect switch when there
is an emergency, press down the emergency disconnect switch to cut off the power.Pull
up the emergency disconnect switch and it will connect the power of the forklift and the
forklift will enter into standby status.
CAUTION
1. Incorrect operation with Emergency Disconnect Switch might cause an accident and
damage the electrical system.
2. Before switching on the forklift, please pull up the Emergency Disconnect Switch first and
then turn the switch key.
OPERATOR MANUAL
5
https://www.forkliftpdfmanuals.com/
3
2
1
60
4