Restoring The Forklift To Service; Procedures To Restore The Forklift To Service - BYD ECB16 Operator's Manual

Restoring the Forklift to Service

Procedures to Restore the Forklift to Service

Remove and clean the dust on the forklift components and complete the following procedures:
1. Lubricate all the components.
2. Lubricate the inside of the hydraulic cylinders by completely lifting/lowering the forks,
tilting masts and handling attachment several times.
3. Check the status of charge of the traction battery.
4. Check the gear oil. Replace it if it contains too much water inside.
5. Check the hydraulic oil. Replace it if it contains too much water inside.
6. Conduct the inspections before daily operation.
7. Operate the forklift.
CAUTION
The operator should repeatedly check the performance of the forklift brake when operating it
for the first time after the forklift has been restored to service.
https://www.forkliftpdfmanuals.com/
103
ECB16 ECB18
OM-ECB162015006-EN-US