Removing A Drive - HP Compaq dc5000 MT Reference Manual

6.8.2 Removing a Drive

1. Prepare the computer for disassembly
2. Remove the access panel and rotate the computer so the system board is parallel to the table
to make it easier to work on
3. Remove the front bezel
4. Disconnect the power and data cables from the back of the drive, as shown in the following
illustrations.
Disconnecting Optical Drive Cables
Disconnecting Diskette Drive Cables
Service Reference Guide, dc5000
Removal and Replacement Procedures— Microtower (µT) Chassis
(Section 6.1, "Preparation for
(Section 6.3, "Access
(Section 6.4, "Front Bezel").
360201-002
Disassembly").
Panel").
6–15