Removing A Slim Optical Drive - HP 280 G4 MT Maintenance And Service Manual

Removing a slim optical drive

1. Prepare the computer for disassembly
2. Remove the access panel
3. Remove the front bezel
4. Disconnect the cables from the rear of the drive (1), press the release latch (2), and slide the drive out of
the front of the drive bay (3).
CAUTION:
removed.
CAUTION:
damaging the cable.
CAUTION:
damaging the cable.
(Access panel on page
(Front bezel on page
The slim optical drive must be removed from the drive cage before the drive cage can be
When removing the cables, pull the tab or connector instead of the cable itself to avoid
When removing the cables, pull the tab or connector instead of the cable itself to avoid
(Preparation for disassembly on page
17)
18)
16)
Drives 29