Disconnecting The Cables - HP b2600 Upgrade Instructions

Upgrading Your System

Disconnecting the Cables

Disconnecting the Cables
1. Disconnect the following nine cables from the system board:
• Fan cables for top and bottom system-board fans and I/O fan
• Power cable for Optical Device
• Data cables for Optical Device and floppy drive
• Front-panel display cable
• Ultra 2 Wide LVD SCSI cable
• Speaker cable
Figure 2-15 Cable locations
Optical Device
Data Connector
Top Sys. Board Fan
Power Connector
Floppy Drive
Data Connector
Bottom Sys. Board Fan
Power Connector
Ultra 2 Wide LVD
SCSI Connector
2. Inspect the system board to ensure that all cables are disconnected.
NOTE The DIMMs are shown for orientation purposes.
20
I/O Fan
Power Connector
Speaker Connector
Front-Panel Display
Connector
Optical Device
Power
Cable Connector
Chapter 2