Removing The Air Divider - HP b2600 Upgrade Instructions
Visualize c class unix workstations
Hide thumbs
Also See for b2600:
- Reference manual (486 pages) ,
- Technical reference (206 pages) ,
- Administration manual (171 pages)
Table of Contents
Advertisement
Upgrading Your System
Removing the Air Divider
Removing the Air Divider
1. Remove the PCI retainer clip by pulling evenly in the direction of the "Pull" tabs on the clip and lifting it
out of the workstation.
Figure 2-12
Removing the Air Divider
2. Remove the two T-15 Torx screws that secure the air divider to the chassis.
3. Note the placement of the air divider for later reference.
4. Grasp the air divider and pull it straight up and out toward you. Set it aside with its screws.
18
PCI Retainer Clip
Air Divider
Chapter 2
Advertisement
Table of Contents
