Managing The 8Gb San Switch; Management Features - HP StorageWorks T5527A User Manual

3 Managing the 8Gb SAN Switch

This chapter provides the following information:
• Management
• Maintaining the 8Gb SAN
• Powering on and
• Interpreting LED
• LED patterns, page 34
• POST and boot
• Firmware
• About the reset
• Replacing a faulty 8Gb SAN Switch

Management features

The management tools built into the 8Gb SAN Switch (listed in
topology, port status, physical status, and other information used for performance analysis and system
debugging.
When running IP over FC, these management tools must be run on both the Fibre Channel host and the
switch and must be supported by the Fibre Channel host driver. For a list of Fibre Channel hosts supported
by the 8Gb SAN Switch, contact your HP representative.
Table 1 1 8Gb SAN Switch management features
Management tool
CLI—Run up to two admin
sessions and four user sessions
simultaneously. For more
information, refer to the latest
version of the HP StorageWorks
Fabric OS administrator guide and
the Fabric OS command reference
guide.
Advanced Web Tools—For
information, refer to the latest
version of the Fabric OS Web
Tools administrator's guide.
Standard SNMP applications—For
information, refer to the latest
version of the Fabric OS MIB
reference guide.
Management Server—For more
information, refer to the latest
version of the HP StorageWorks
Fabric OS administrator guide and
the Fabric OS command reference
guide.
features, page 31
Switch, page 32
off, page 33
activity, page 34
specifications, page 36
update, page 37
button, page 37
Out-of-band support
Ethernet or serial connection
Ethernet connection
Ethernet connection
Ethernet connection
Table 1 1) can be used to monitor fabric
In-band support
IP over FC
IP over FC
IP over FC
SMI-S compliant management
program
Brocade 8Gb SAN Switch for HP BladeSystem c-Class
31