About this guide
This guide provides information about setting up and configuring the Brocade 8Gb SAN Switch for HP
BladeSystem c-Class. Throughout this guide the short product name is used, 8Gb SAN Switch.
Intended audience
This guide is intended for system administrators and technicians with knowledge of:
•
Configuration aspects of customer Storage Area Network (SAN) fabric
•
Customer host environments, such as Microsoft Windows or Linux
•
Command Line Interface (CLI) commands
•
Advanced Web Tools graphical user interface (GUI) for configuring the switches through a
supported web browser
SAN Switch related documentation
SAN Switch-related documents and other SAN infrastructure documentation, including white papers and
best practices documents, are available at:
Scroll to the storage section of the web page and select Storage Networking for HP StorageWorks
products.
IMPORTANT:
For late-breaking, supplemental information, access the latest version of the
release notes
HP BladeSystem c-Class related documentation
HP BladeSystem c-Class enclosure user documentation, including white papers and best practices
documents, are available at:
http://www.hp.com/go/bladesystem/documentation
Before you contact HP Technical Support
Be sure to have the following information available before you call HP:
•
Technical support registration number (if applicable)
•
Product serial number
•
Product model name and number
•
Applicable error messages
•
Third-party hardware or software
•
Operating system type and revision level
For continuous quality improvement, calls may be recorded or monitored.
for the 8Gb SAN Switch.
http://www.hp.com/support/manuals
Brocade 8Gb SAN Switch for HP BladeSystem c-Class
HP StorageWorks Fabric OS
9