Table of Contents
Advertisement
Table 1. 5300xl Switch Features Not Supported on an ACM (Continued)
Feature
Configuring IP
Addresses
DHCP/DHCP Relay
IP Helper Address
Flow Control
GVRP
IGMP
Interface Monitoring
(Port Mirroring)
Interface Provisioning:
Speed
Duplex
Flow-Control
Auto-MDIX mode
IP Routing/
Multicast Routing
IP Stacking
IRDP
Link Test
LLDP
'x' indicates that the feature is not supported.
Using 5300xl Features with the Access Controller xl Module
Explanation
x
Not allowed.
x
Not allowed.
x
Not allowed.
Not supported across an ACM.
x
x
x
x
1. GVRP cannot be enabled on an uplink,
downlink, or downlink client port.
2. A port in a GVRP VLAN cannot be added
to a client VLAN.
3. If GVRP is enabled on a port when it is
added to a client VLAN, it is disabled.
x
x
x IGMP cannot be enabled on client
VLANs.As a result, it cannot be enabled on
downlink client ports.
x
x
x
Cannot be used as a monitoring port.
x
x
Fixed at 1000Mbps.
x
x
Fixed at Full-Duplex.
x
x
Not allowed.
x
x
Not allowed.
x
No routing is done.
x
Not allowed.
Not supported across an ACM.
x
Not allowed.
x
x
Test packets not supported across an ACM.
x
x
Set to off.
7
Advertisement
Table of Contents
