Managing The Acm; Using The Acm's Extended Cli - HP ProCurve J8162A Supplementary Manual

Syntax: show temperature
Displays the current temperature in degrees Celsius of
the main processor of the ACM module.
Syntax: show vlans
Displays the VLAN ID, VLAN Name, and Ports for all
VLANs associated with the ACM's uplink and downlink
ports.

Managing the ACM

Once the module is installed and configured, most management tasks are done
on the Access Control Server 740wl or Integrated Access Manager 760wl, using
the Administrative Console. The Access Controller Module is managed in the
same manner as a 720wl. For more information, see the HP ProCurve Secure
Access 700wl Series Management and Configuration Guide, available on the
CD shipped with the ACM, or from the ProCurve Networking Web site at
http://www.hp.com/go/procurve. (Click on Technical support, then Product man­
uals (all)).

Using the ACM's Extended CLI

A set of extended commands, available from the Access-Controller context,
may be used to configure an ACM or display its status. These commands are
a subset of the 720wl CLI commands. They are documented in the HP
ProCurve Secure Access 700wl Series Management and Configuration
Guide, available on the CD shipped with the ACM, or from the ProCurve
Networking Web site at http://www.hp.com/go/procurve. (Click on Technical
support, then Product manuals (all)).
To access this context, type the following in the ACM context:
HPswitch(access-controller-id) # enable extended-commands
The command line prompt for the extended context is:
Managing the ACM
27