Table of Contents
Advertisement
Configuring the Access Controller xl Module
22
Syntax:
[no] access-controller <slot-id> client-ports vlan < vlan-list >
Configures client VLANs with the VIDs given, contain
ing only the downlink port, (<slot-id>DP), as a tagged
member.
The no form can be used to remove client VLANs that
were configured using the access-controller <slot-id>
client-ports vlan < vlan-list > command and contain only
the downlink port.
Syntax:
access-controller <slot-id> reload]
Reboots the access controller in slot-id with the current
software version.
Syntax:
access-controller <slot-id> shutdown]
Halts the access controller in slot-id.
Syntax:
access-controller vlan-base <2-4094>]
Sets the starting VLAN ID (VID) for client VLANs
configured by the access-controller <slot-id> client-ports
< port-list > or the access-controller <slot-id> client-ports
vlan < vlan-list> commands. Valid VIDs are 2 - 4094.
Access Controller Context Command Syntax
Syntax:
access-control-server ip <ip addr> secret <secret> <secret>]
Specifies the numeric ip address and shared secret for
the access control server (740wl or 760wl) that pro
vides services to the ACM.
The secret must match the shared secret configured on
the 740wl/760wl. If the shared secret contains spaces,
enclose the secret in double quotes (" "). The secret must
be entered twice, identically.
Advertisement
Table of Contents
