Acm Configuration Commands Summary And Syntax; Configuration Context Command Syntax - HP ProCurve J8162A Supplementary Manual

Configuring the Access Controller xl Module
20

ACM Configuration Commands Summary and Syntax

Command
Configuration Context
access-controller <slot-id>
[no] access-controller <slot-id> client-ports [e] < port-list >
[no] access-controller <slot-id> client-ports vlan < vlan-list >
access-controller <slot-id> reload
access-controller <slot-id> shutdown
access-controller vlan-base <2-4094>
Access Controller Context
access-control-server ip <ip addr> secret <secret> <secret>
enable extended-commands
exit
ip-addr
[no] ip address <<
[no] ip default-gateway <
[no] page
terminal <length <2-1000> | width <61-1920>>

Configuration Context Command Syntax

Syntax: access-controller <slot-id>
Changes the CLI to the access controller context for the
access controller in slot-id (a - h). The exit command
returns the CLI to the configuration context.
i
>/<1-32> | < p addr> <mask>>
ip-addr
>
Page
20
21
22
22
22
22
22
23
23
23
23
23
23