HP ProCurve J8162A Supplementary Manual page 32

Managing the ACM
28
HPswitch(access-controller-id-ext)#
The available commands are listed below. Detailed descriptions are found in
Appendix A, "Command Line Interface" in the HP ProCurve Secure Access
700wl Series Management and Configuration Guide.
Command
[no] ip address <<ip-addr>/<1-32> | <ip-addr> <mask>>
[no] ip default-gateway <ip-addr>
[no] page
access-control-server ip <ip-addr> secret <secret> <secret>
add bridging <atalk | cdp | wnmp> | <custom-bridging-string>
cancel upgrade
Clear Commands
clear accesscontrolserver
clear dhcpserver
clear dns
clear domainname
clear gateway
clear hostname
clear logs
clear sharedsecret
clear upgradeproxy
delete bridging <atalk | cdp | wnmp> | <custom-bridging-string>
enable extended-commands
exit
factoryreset
get upgrade <url> <key> [mindowngrade | reboot | version]
help
logoff client <all | mac <mac-addr>>
reboot [downgrade | same | upgrade]
Set Commands
set accesscontrolserver <ip-addr>
set bridging <on | off>
set clientprobes <interval> <timeout>